Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Summerlin Homeowners Choose Toto Construction
We provide independent Toto construction service in Summerlin, NV: repair, installation and remodeling work on Toto toilets, Washlet bidet seats and EcoPower sensor faucets, plus the bathroom remodeling that surrounds them. What makes our Toto work different is that we treat these fixtures as their own parts ecosystem, not as generic plumbing, and we plan the job around Summerlin’s HOA design-review process before anything gets ordered. Our technicians have up to 14 years of experience working on high-efficiency toilets, bidet seats and sensor faucets, and our estimates are free. One thing to be clear about: we are an independent service provider. We’re not affiliated with, authorized by or endorsed by Toto. Call (844) 797-3059 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Summerlin for Your Toto Construction?
Toto fixtures have their own logic. A Drake or Ultramax II doesn’t use the same fill-valve and flapper setup you’ll find on a builder-grade toilet, and a Washlet seat adds a supply line, a t-valve and a control board that most general plumbers touch rarely. Our technicians have worked on these fixtures enough to know the difference between a five-minute flapper swap and a symptom that points at something deeper.
We steer toward Toto OEM fill valves, flappers, tank gaskets and Washlet supply kits. Not because of brand loyalty, but because aftermarket parts are a common source of repeat leaks and reduced flush performance on high-efficiency toilets. Those parts cost more up front. They also tend to be the last time you think about that toilet for a while.
Warranty-safe work matters here too. We service Toto equipment the way the manufacturer’s own guidance expects, which keeps your coverage intact. If a repair needs a part we can’t source at a fair price, we’ll tell you that before we start, not after. And if the honest answer is that a fixture has reached replacement age, we’ll say so plainly rather than sell you a repair that won’t hold.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Summerlin
Most of what we see on Toto fixtures in Summerlin comes down to three things: hard water, age, and a fixture that was installed well but never serviced. Here’s what those problems actually look like.
- Washlet nozzles that clog or scale up. The bidet still powers on, the lights work, but water stops or sprays weakly. Summerlin’s high-mineral water leaves scale in the nozzle openings over time, and a nozzle that hasn’t been cleaned on a regular schedule can seize entirely. Sometimes it’s a cleaning issue. Sometimes the nozzle assembly needs replacement, and we can tell which after a look.
- Washlet control board failure. The seat stops responding to the remote or its own panel. Power is there, nothing else is. Control boards are sealed units, so this is usually a board replacement or a seat swap rather than a repair you can nurse along.
- Supply hoses and t-valve connections weeping. A Washlet taps into the toilet’s fill line through a t-valve, and that connection sits low and behind the bowl where nobody looks. Slow weeps there go unnoticed for months. By the time you see a stain on the floor or smell something musty, the subfloor has usually been damp for a while.
- Phantom runs from fill-valve and flapper wear. On two-piece Drake models and the Ultramax II, a worn flapper or a fill valve that no longer shuts off cleanly produces a faint running sound and a toilet that refills itself at odd hours. In a desert climate where every gallon is metered, that trickle adds up on the water bill before it ever shows as a visible problem.
- Tank-to-bowl gasket and closet-bolt corrosion. This is the slow one. A gasket that’s been seeping for years softens the subfloor around the flange, and corroded closet bolts let the bowl rock just enough to keep the leak going. Left alone, it turns a straightforward repair into floor work.
A typical job goes like this. A Summerlin homeowner with a Drake or Ultramax toilet notices a faint running sound and a damp ring at the base. The closet bolts and tank gasket have been leaking slowly, and the subfloor around the flange is soft. A qualified local pro pulls the fixture, repairs or replaces the flange and valve seat, reshims the bowl on a new wax ring and swaps in OEM fill-valve and gasket parts, then checks a nearby Washlet connection for the same weep before closing things up.
Toto Parts & Our Repair-vs-Replace Approach
Parts selection is where most Toto repairs are won or lost. We use quality parts that fit Toto equipment, favoring OEM fill valves, flappers, tank gaskets and Washlet supply kits because the aftermarket equivalents are a known source of repeat leaks and weaker flush performance. We don’t stock OEM or genuine Toto parts, and we’re not a dealer. We source what the job needs and use what fits correctly.
Here’s how we decide between repair and replacement. If the fixture is sound, the finish is intact and the valve seat and flange are healthy, a straight repair is the honest call every time. If a single Washlet is out of production, or its control board has failed and no compatible replacement is available, a seat swap or straight replacement makes more sense than chasing a repair. A full fixture replacement only earns its price when the finish, the flange or the valve seat is already failing underneath. That’s the point where repair money starts disappearing into a toilet that will keep asking for more.
Call (844) 797-3059 and we’ll tell you which side of that line your fixture is on. Estimates are free.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We start with the symptom you’re actually experiencing: a phantom run, a weak bidet spray, a damp ring at the base, a faucet that won’t trigger. Then we check the parts behind it, including the supply line and t-valve on any Washlet, since those are the connections owners never see.
- 2
Repair or installation. Once we know what’s failing, we quote the work with the parts named. For a toilet that means fill valve, flapper, gasket, wax ring, closet bolts and flange as needed, in the right sequence. For a Washlet it means the nozzle assembly, control board or supply kit. For a new install, it means setting the fixture level and sealing it correctly the first time.
- 3
Testing. We run the fixture through a full cycle: flush volume, refill, shutoff, bidet spray pattern, sensor faucet activation. Then we check for weeping at every connection and confirm the bowl doesn’t rock. A toilet that passes on the first flush and fails on the fiftieth isn’t fixed, so we test the way you’d use it.
- 4
Warranty. We leave you with a clear record of what was replaced and why, which keeps your Toto coverage straightforward if anything comes up later. Workmanship is backed as well.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Summerlin
We work on the Toto fixtures Summerlin owners actually have in their homes. Two-piece Drake toilets, including the CST743 and CST746, are the most common repair call, usually for fill-valve and flapper wear. The Ultramax II one-piece gets the same service plus attention to its integrated tank and gasket. Washlet bidet seats, from the C100 through the S350e and S550e, come in for nozzle cleaning, supply-kit replacement and control board issues. EcoPower sensor faucets need sensor and cartridge attention when they stop triggering or start running long. Beyond the fixtures themselves, we handle the bathroom remodeling around them: full bathroom remodels, walk-in showers and shower remodels, and bathroom vanity installation. We don’t claim to stock any of these products. We service and install them.
We Also Service These Brands
Toto is one part of a bigger picture. We also work with KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures, which means a bathroom project doesn’t stop at the toilet. If your remodel touches the vanity, the counter or the shower, we can carry the materials and the craft through the whole room under one estimate instead of handing you off between trades.
FAQs – Toto Construction Service in Summerlin
No. We are an independent service provider with no affiliation, authorization or endorsement from Toto. We repair, install and service Toto fixtures using quality parts that fit them, and we say so plainly because it matters when warranty questions come up. Call (844) 797-3059 for a free estimate.
Yes. We favor OEM fill valves, flappers, tank gaskets and Washlet supply kits because aftermarket parts are a common cause of repeat leaks and reduced flush performance on high-efficiency toilets. We don’t stock OEM or genuine Toto parts; we source the correct part for the job.
Most single-fixture repairs, like a fill valve and flapper or a Washlet supply kit, are done in a single visit. Flange and subfloor repairs take longer because the fixture comes out and the floor has to be sound before it goes back. A full bathroom remodel runs on its own schedule, and the written estimate lays out the phases. Call (844) 797-3059 and we’ll give you a realistic timeline for your specific fixture.
Two-piece and one-piece toilets including the Drake and Ultramax II, Washlet bidet seats, and EcoPower sensor faucets. We also handle the bathroom remodeling around them: full remodels, walk-in showers, shower replacements and vanity installation.
Not when the work is done correctly with parts that fit the fixture. Our approach is warranty-safe: correct parts, correct installation sequence, and a clear record of what was replaced. We can’t guarantee the manufacturer’s decision on any claim, but we make sure nothing about our work gives them a reason to deny it.
A single-fixture repair is priced per job rather than by a fixed rate, and a full bathroom project falls into these typical estimated ranges:
| Project | Typical Estimated Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
These are estimates, not quotes. The written estimate sets the final price. Call (844) 797-3059 for an exact quote on your Summerlin project, estimates are free.
Yes, in most cases. A Washlet mounts to the existing bowl through the seat bolts and the t-valve connection at the fill line, so the toilet itself stays. If the bowl, flange and valve seat are sound, a seat swap is straightforward and far less expensive than a full replacement.
Almost always the flapper or the fill valve. A flapper that no longer seals lets water trickle from the tank into the bowl, and the fill valve keeps topping the tank off. Hard water in Summerlin accelerates both. Call (844) 797-3059 for a free estimate, most of these are a quick fix.
No special plumbing. They do need the flange, wax ring and supply line to be in good condition, because a high-efficiency toilet moves less water per flush and any leak at the base shows up faster on the subfloor. If your flange is corroded or your subfloor has been soft for a while, that gets addressed as part of the job.
If the problem is the nozzle, supply line or t-valve, repair it. If the control board has failed and the seat is out of production or no compatible board is available, replacement is the honest call. Call (844) 797-3059 and we’ll give you a straight answer after a look.
Usually yes. A tub-to-shower conversion focuses on the wet area, so the toilet and vanity typically stay where they are unless the layout changes or the floor under them needs repair. We check the toilet’s flange and supply connections while the room is open, since that’s the easiest time to fix a slow leak you didn’t know about. Call (844) 797-3059 to talk through your layout.
Book Your Toto Service in Summerlin, NV
Whether it’s a running Drake, a Washlet that stopped spraying, an EcoPower faucet that won’t trigger, or a full bathroom remodel built around the Toto fixtures you already own, we’ll give you a written estimate with the parts and the price named up front. Call (844) 797-3059. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Summerlin.