Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Summerlin Homeowners Choose CWS Construction
We provide independent CWS construction and cabinet service in Summerlin, and what sets our CWS work apart is that we judge your cabinets on how they’re actually built, not on a warranty script from the manufacturer. We look at box joinery, hinge and glide hardware, and finish adhesion, then tell you plainly whether the run needs a repair or a replacement. Our technicians have up to 14 years of experience, and we treat Summerlin’s desert swing from single-digit winter humidity to 100°F+ summers as the root cause behind most CWS cabinet failures we see here.
Construction Summerlin is an independent contractor. We are not affiliated with, authorized by, or a dealer for CWS, and nothing on this page should be read as manufacturer authorization. We repair, install, and service CWS cabinetry and millwork using quality parts that fit it.
Summerlin is a master-planned community built out largely between the 1990s and 2010s, and that history matters to cabinet work. Mediterranean and Spanish Revival stucco-and-tile homes fill most of the community, with newer custom and semi-custom builds out toward The Ridges and Red Rock. Kitchens in these homes are often 15 to 25 years into their first cabinet set. That’s exactly the age where CWS painted doors start showing stress and box materials start to give at the wet end of the run. Call (844) 797-3059 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Summerlin for Your CWS Construction?
Our technicians know CWS cabinet construction firsthand. CWS builds cabinet lines in both framed and frameless configurations, in painted maple and MDF, plus quartz and granite countertop programs and bath vanity collections in painted and stained finishes. When we open a door and look at the box, we can tell you which category you’re working with and what repair path actually fits it. That familiarity is why we don’t guess at a fix or push a full replacement when the boxes are sound.
Quality parts matter here. When a CWS line is still supported, we use OEM hinges, glides, and touch-up finishes so the repair blends with the existing cabinet face. When a line is no longer supported, we match by hinge cup pattern, overlay, and glide length, then install quality aftermarket hardware that preserves door alignment instead of forcing a partial or full tear-out. That’s a warranty-safe approach, and it keeps a kitchen that’s structurally solid from being sent to the landfill over a $30 glide.
We also know when hardware replacement won’t solve the problem. A failed glide is a straightforward swap. A swollen particleboard sink base with crumbling edges is not. You’ll get a straight answer on which one you’re facing before any work starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Summerlin
Here’s what CWS cabinetry in Summerlin actually shows when it’s failing, and why. These are the failure modes we see most often:
- Painted doors and drawer fronts cracking along stiles and rails. Summerlin’s single-digit winter humidity pulls moisture out of the paint film, and then the 100°F+ summer heat expands it again. That cycle stresses the film at the door frames, producing hairline cracks and peeling over time. It’s a finish problem, not a structural one, and it’s very repairable.
- Swollen or crumbling cabinet boxes at sink bases and dishwasher openings. Particleboard and MDF boxes absorb water from slow supply-line or fixture leaks that go unnoticed, especially in Summerlin homes that sit vacant during travel seasons. By the time the swelling shows, the leak has usually been running for months.
- Soft-close hinges that lose dampening and undermount glides that sag at the cabinet face. Heavy pull-out use in wide-pot drawers accelerates wear on the glides. You’ll notice the drawer front dropping a fraction of an inch or the door failing to close flush. That’s a hardware issue, and it’s fixable without touching the box.
- Quartz and granite tops showing seam separation and edge chipping. This happens when the cabinet run beneath the counter wasn’t shimmed and leveled correctly on a slab that has shifted. Summerlin’s expansive soils move, and a run set on an unlevel base telegraphs that movement straight up to the countertop seams.
- Doors that no longer align across a run. A run that was level at install can drift as hardware wears unevenly and the base settles. Before we replace anything, we check whether re-shimming and re-hanging brings the doors back into alignment.
A CWS painted cabinet kitchen in a Summerlin home often shows fine cracking along the door frames and a soft, swollen sink base after a slow leak. The usual cause is paint film stress from very low winter humidity plus particleboard swelling at the wet end of the run. A qualified local pro typically tests the boxes for soundness, replaces swollen base units and failed hinges or glides, re-levels and re-shims the run, and refinishes or refaces the doors rather than tearing out a kitchen that is structurally still solid.
CWS Parts & Our Repair-vs-Replace Approach
We don’t stock OEM or genuine CWS parts. What we do is source quality parts that fit your CWS equipment, matching hinge cup pattern, overlay, and glide length so the new hardware works with your existing door fronts. When a CWS line is still supported, we can use OEM hinges, glides, and touch-up finishes. When it isn’t, aftermarket hardware from a reputable maker gets the job done and preserves alignment.
Our repair-versus-replace call comes down to the boxes. If the cabinet boxes are sound and the failure is finish, hardware, or a single wet base unit, refacing or partial replacement is the right answer. If box swelling or finish failure is widespread across the run, a full replacement starts to make more sense, and we’ll say so. Quartz and granite tops installed over CWS base cabinets also factor in: if the counter is sound but the base has shifted, re-leveling and re-shimming the run preserves the top and avoids a much bigger job. If the counter shows seam separation or chipping from an unlevel base, we’ll tell you what’s actually at fault before quoting either fix.
Call (844) 797-3059 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We open the cabinet run, inspect box construction, test the boxes at sink bases and dishwasher openings for moisture and swelling, check hinge and glide hardware across every door and drawer, and look at how the counter interacts with the base.
- 2
Repair or install plan. You get a written plan that names what’s being replaced, what’s being refinished or refaced, and what’s staying put. CWS-specific detail drives the plan: which hardware gets OEM parts, which gets matched aftermarket parts, and which base units come out.
- 3
Execution. Swollen base units are removed and replaced, hinges and glides are swapped, the run is re-leveled and re-shimmed, and doors are refinished or refaced so the finish matches the rest of the cabinetry.
- 4
Test and alignment check. Every door and drawer gets opened, closed, and pull-tested. Glides are adjusted so drawer fronts sit flush. Soft-close dampening is verified across the run, not just on the ones that were replaced.
- 5
Warranty and handoff. You get a written record of what was replaced or refinished and the warranty terms on the work. We also flag any slow leaks we found at the sink or dishwasher so the box repair isn’t undermined by the source problem.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Summerlin
We service and install CWS painted maple and MDF cabinet lines in both Shaker and flat-panel styles, CWS framed and frameless cabinet series, and the CWS bath vanity and linen cabinet collections in painted and stained finishes. We work with the CWS quartz and granite countertop programs paired with their cabinetry packages, including re-sealing and re-caulking at the backsplash where the counter meets the wall. On the service side, we handle hinge and glide replacement, door and drawer front refinishing, base-unit replacement, run re-leveling, and refacing. Our technicians have up to 14 years of experience working with cabinet systems like these.
We don’t stock CWS products. What we install and repair is what’s on your existing CWS cabinetry, sourced through the right fit for that cabinet line.
We Also Service These Brands
We’re a multi-brand cabinetry and countertop contractor, not a single-brand dependent shop. Alongside CWS work, we service and install KraftMaid cabinetry, and we fabricate and install Cambria quartz and Silestone surfaces paired with Kohler plumbing fixtures in the same kitchen. That range means when your CWS run needs a partial replacement but the layout changes, we can source the right cabinet and counter combination without sending you to a different contractor for each piece. One contractor, every phase of the kitchen.
FAQs – CWS Construction Service in Summerlin
The cracking comes from paint film stress caused by Summerlin’s humidity swing, not from a defect in the cabinet itself. Winter humidity drops into single digits and pulls moisture out of the paint film, then summer heat pushes past 100°F and expands it again. That cycle produces hairline cracks and peeling along the stiles and rails. The fix is refinishing the affected door and drawer fronts, not replacing the kitchen. Call (844) 797-3059 for an exact quote. Estimates are free, and we answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday.
A single swollen sink base or dishwasher-opening box can usually be replaced without touching the rest of the run. Particleboard and MDF swell at the wet end of the cabinet when a slow supply-line or fixture leak goes unnoticed, and the fix is to replace that base unit, re-level the run, and stop the leak. The full run only needs replacement when box swelling or finish failure is widespread. Call (844) 797-3059 for an exact quote. Estimates are free.
They don’t need OEM parts, but they do need correct-fit parts. When a CWS line is still supported, OEM hinges and glides are the cleanest match. When it isn’t, we match by hinge cup pattern, overlay, and glide length so the new hardware keeps the door alignment you already have. Quality aftermarket hardware works fine when it’s matched correctly. Call (844) 797-3059 for an exact quote. Estimates are free.
Quartz doesn’t need sealing the way porous stone does, so if the issue is a gap at the backsplash, it’s usually a caulking problem, not a surface-sealing one. Seam separation or edge chipping along a CWS quartz top typically traces back to a cabinet run that wasn’t shimmed and leveled correctly. We check the base before recommending any counter repair. Call (844) 797-3059 for an exact quote. Estimates are free.
Cabinet installation runs $4,000 – $13,000 and a full kitchen remodel runs $14,000 – $45,000. Refacing sits well below full replacement because the boxes stay. Countertop installation is $2,000 – $6,500 and backsplash work is $800 – $2,500 if you’re pairing the refacing with new surfaces. These are typical estimates; the written line-item estimate sets the final price. Call (844) 797-3059 for an exact quote. Estimates are free.
Hardware swaps and door refinishing typically finish within a day or two. Replacing a swollen base unit and re-leveling a run usually takes longer because the countertop may need to come off and go back on. Refacing a full kitchen run spans a longer window than a hardware swap. We give you a written schedule with the estimate, and the written estimate sets the final price. Call (844) 797-3059 for an exact quote. Estimates are free.
Typical estimates for CWS-related work in Summerlin:
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
These are typical estimated ranges, not fixed prices. The written, line-item estimate sets the final price. Call (844) 797-3059 for an exact quote. Estimates are free.
Book Your CWS Service in Summerlin, NV
If your CWS cabinets are cracking, sagging, or showing a soft base, call us before you commit to a full replacement. We’ll tell you what’s fixable and what isn’t, in writing, with a free estimate. Construction Summerlin is an independent CWS service provider, licensed and insured, and we handle everything from refacing to full kitchen remodeling under one contract.
Call (844) 797-3059. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Written by the team at Construction Summerlin.