Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Summerlin Homeowners Choose CGI Construction
We provide independent CGI construction service in Summerlin, NV, for homeowners who already have CGI cabinetry, quartz countertops, or vanity collections in place and need them installed, repaired, or brought back to how they looked on day one. What makes our CGI work different is the diagnostic approach: we identify the specific failure point – a worn glide, a failed seam, lifting thermofoil – before anyone talks about a full tear-out. We’re an independent provider, not affiliated with, authorized by, or endorsed by CGI. Our depth comes from hands-on installation and problem-solving with the full range of CGI kitchen and bath products in real Summerlin homes. Call (844) 797-3059 to schedule a free estimate.
Summerlin adds a layer most out-of-town contractors miss. This is a master-planned community built out largely between the 1990s and 2010s, and nearly every kitchen or bath change runs through HOA architectural review and community design guidelines before a Clark County permit is even filed. Approved color palettes, submittals, CC&Rs – all of it shapes what material and finish you can put in. We plan CGI projects around that reality instead of discovering it mid-job.
Why Trust Construction Summerlin for Your CGI Construction?
Our technicians have up to 14 years of experience, and a good share of it has been spent inside CGI kitchens and baths – reading the way Euro-style frameless boxes are built, how Shaker doors hang and swing, where a quartz seam sits relative to a sink cutout, and what a vanity collection looks like underneath when the finish starts to go. That familiarity matters because CGI products have specific tolerances. A glide that’s close but not right will bind within months. A hinge that doesn’t match the drilling pattern will pull out of the door panel. We source OEM CGI parts for critical hardware like hinges and drawer glides so fit and finish stay intact, and quality aftermarket components for non-structural elements only when they meet or exceed the original spec.
Warranty-safe practice is part of the job, not an afterthought. We document what we find, keep the original mounting and drilling points wherever possible, and avoid the shortcuts that give a manufacturer a reason to walk away from a claim. When a repair touches an area still under a CGI warranty, we tell you before we start so you can decide how you want to handle it. Estimates are free and written line by line, so you know what’s being replaced and why.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Summerlin
These are the failures we see most often in CGI kitchens and baths around Summerlin. None of them mean the whole installation is shot.
- Soft-close drawer glides that lose dampening. After a few years of daily use, the dampener inside the glide stops grabbing and drawers slam shut. It’s usually the glide itself, not the drawer box – the mechanism wears at the internal catch, and once it goes, no adjustment brings it back.
- Thermofoil peeling and bubbling near the bottom edge. Dishwashers and sinks throw steam and splashes at the lower doors constantly, and that heat plus moisture works under the film until it lifts. It almost always starts at the bottom edge and creeps upward.
- Quartz countertop seams that darken or collect grime. When the initial epoxy joint fails, the seam opens by a hair and holds moisture and dust. Darkening along a seam is the first sign; left alone, it gets worse and harder to clean.
- Chipped paint or stain at high-touch points. Drawer pulls, door corners, and the edges where hands land repeatedly take the wear. Small chips are easy to arrest; chips that expose the substrate underneath are not.
- Vanity finishes failing at the toe kick and around the basin. Splash zones and floor-level moisture are hard on painted and stained vanity collections. Finish wear there is a moisture story, not a bad finish story.
Desert conditions play a role too. Intense UV through west-facing kitchen windows degrades finishes and sealants faster than you’d expect, and the dry air plus seasonal monsoon humidity swings work cabinet joints and caulk lines over the years. That’s a Summerlin maintenance reality worth knowing before a small issue becomes a replacement.
How a typical CGI repair usually goes
A homeowner notices that several CGI cabinet drawers no longer close flush and the soft-close mechanism has failed, while the countertop seam near the sink has turned dark. The usual cause is worn glide hardware and a failed epoxy joint from years of moisture exposure. A qualified local pro typically replaces the glides with OEM or equivalent parts, cleans and re-seals the countertop seam, and checks adjacent cabinets for early signs of thermofoil peeling to address before it spreads. Diagnosis first, then the smallest repair that actually solves it.
CGI Parts & Our Repair-vs-Replace Approach
We don’t stock CGI parts and we’re not a CGI dealer – we source what the job needs, when it needs it. For hinges, drawer glides, and the hardware that holds fit and finish together, we go OEM so the mounting pattern and alignment match what’s already drilled. For non-structural pieces, a quality aftermarket component that meets or exceeds the original spec is often the smarter buy, and we’ll say so.
The repair-or-replace call comes down to the boxes. If the cabinet carcasses are solid – square, dry, no swelling at the bottom – then refacing, new doors, or hardware replacement is usually the better move. You keep the layout you already like and spend a fraction of a tear-out. If water damage has compromised the boxes, replacement is the honest recommendation, because new fronts on a soft carcass won’t hold. We put both options in writing so you can compare them side by side. Call (844) 797-3059 if you’re weighing it.
Typical estimated ranges for the work around CGI products in Summerlin:
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
These are estimates. The written estimate sets the final price.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We open the drawers, check every glide and hinge, press on the thermofoil edges, and look at the quartz seams under raking light. On a vanity we check the toe kick and the caulk line at the basin. You get a clear account of what failed and why.
- 2
Scope and material choice. We lay out repair versus replacement for each item, name the parts involved, and let you choose the material direction. Where the project touches the home’s exterior or visible finishes, we check the HOA design guidelines before anything is ordered.
- 3
Repair or install. Glides and hinges get replaced at the original mounting points. Seams get cleaned out and re-sealed. New cabinets, countertops, or a vanity get set level and plumb, with cutouts planned around the seam layout so the joint lands where it’s least visible.
- 4
Test and walkthrough. Every drawer gets cycled. Every door gets checked for swing and reveal. Seams get inspected dry. We walk the finished work with you before we call it done.
- 5
Warranty and record. You get the parts and work documented, which protects you if a manufacturer question comes up later. If something we touched acts up, you call and we come back.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Summerlin
We work on CGI Euro-style frameless cabinets – the full-overlay boxes with their own hinge and glide geometry – and CGI Shaker-style cabinetry, where door alignment and finish touch-ups matter most. We install and repair CGI quartz countertops, including seam work and sink and cooktop cutouts, and we handle CGI vanity collections in bathrooms, from a finish repair to a full replacement set. We also take on the surrounding work: cabinet installation and refacing, quartz and granite countertops, and full kitchen remodeling where the CGI product is one part of a larger scope. We don’t claim to stock any of it. We assess what’s in your home, tell you what it needs, and source accordingly.
We Also Service These Brands
CGI is one line in a much wider material roster. We work with KraftMaid and Wellborn cabinetry, Cambria and Silestone quartz, and Kohler fixtures, along with dozens of other named manufacturers across the trades. That matters on a CGI project because it means we’re not steering you toward one brand out of convenience. You choose the material, we handle the craft – and if CGI turns out not to be the right answer for a particular cabinet or counter, we can show you what else fits.
FAQs – CGI Construction Service in Summerlin
No. We are an independent CGI service provider and we’re not affiliated with, authorized by, or endorsed by CGI. Our knowledge comes from hands-on installation and repair work with CGI cabinetry, countertops, and fixtures, not from a manufacturer badge. Call (844) 797-3059 for a free estimate.
Often yes, if the peeling is caught early and limited to a few doors. The affected door faces can be replaced individually, and in some cases a localized repair holds, though once the film has lifted past the bottom edge, replacement of those specific faces is the more durable fix. We check the adjacent doors at the same time because steam damage usually shows up in clusters near the dishwasher and sink. Call (844) 797-3059 and we’ll tell you what’s realistic for your kitchen.
It’s almost always the glide. The dampener inside the mechanism wears out with repeated use, and once it stops grabbing, the drawer slams no matter how you adjust it. The drawer box itself is usually fine. We replace the glides with OEM CGI parts so the mounting pattern and closing action match the original. Call (844) 797-3059 to get an exact quote – estimates are free.
It can usually be repaired. A darkened seam means the original epoxy joint has failed and is holding grime; cleaning it out and re-sealing restores the joint without touching the slab. Replacement only becomes the answer if the quartz itself is cracked or chipped at the seam. Call (844) 797-3059 to have it looked at.
No, not usually. Chipping at high-touch points and around the toe kick is a finish problem, not a structural one, and it can be addressed without pulling the vanity out. We check whether moisture is driving the wear before we repair, because a finish repair over an active moisture source won’t last. Call (844) 797-3059 for a free estimate.
Yes, when the cabinet boxes are solid. If the carcasses are square, dry, and free of swelling, refacing or new doors and hardware keeps your layout and costs a fraction of a tear-out. If water damage has compromised the boxes, replacement is the better long-term investment, and we’ll tell you that plainly. Call (844) 797-3059 to talk through which side of that line your kitchen sits on.
Typical estimated ranges in Summerlin run $4,000 – $13,000 for cabinet installation, $2,000 – $6,500 for countertop installation, $800 – $3,000 for a bathroom vanity installation, and $14,000 – $45,000 for a full kitchen remodel. These are estimates; the written estimate sets the final price. Call (844) 797-3059 – estimates are free.
Hardware and seam repairs are usually a short job measured in hours, while cabinet, countertop, or vanity installation runs longer depending on scope and material lead times. HOA design review in Summerlin adds a step before permits on projects that change visible finishes, so we build that into the schedule from the start. Call (844) 797-3059 and we’ll give you a realistic timeline.
Book Your CGI Service in Summerlin, NV
Whether it’s a drawer that won’t close, a seam that’s gone dark, or a full CGI kitchen or bath project, we’ll diagnose it first and quote it in writing. Licensed and insured, with free estimates and a workmanship warranty. Call (844) 797-3059. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Summerlin.