Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Summerlin Homeowners Choose Therma-Tru Construction
Construction Summerlin provides independent Therma-Tru service in Summerlin, NV: we repair, install, adjust, and weather-seal Therma-Tru entry doors and door systems for homeowners across the valley. What makes our Therma-Tru work different is that we treat the door as a system – slab, sill, sweep, weatherstripping, hinges, and lock hardware all moving together – because in Summerlin’s sun and dust, the seal fails long before the door does.
We are an independent Therma-Tru service provider. We are not authorized, sponsored, or warranty-backed by Therma-Tru, and we don’t speak for the manufacturer. What we do have is a deep working familiarity with Therma-Tru’s fiberglass and steel entry systems across Summerlin’s stucco-and-tile housing stock, from the sill pan up. Our technicians have up to 14 years of experience with these doors, and our scope runs from the driveway to the roofline under one contract – so a door repair can sit inside a larger window, kitchen, or bathroom plan without a second company. Call (844) 797-3059. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Summerlin for Your Therma-Tru Construction?
Therma-Tru doors reward people who understand how they’re built. The slab is a skin over a frame, the adjustable sill carries the seal, and the sweep gasket at the bottom is what actually keeps desert dust out of your house. Get one of those components wrong and the door reads as “bad” when only a $30 part has failed. Our technicians have up to 14 years of experience reading doors this way – checking hinge alignment before touching the sill, checking the sill before blaming the weatherstripping.
We fit Therma-Tru equipment with quality parts that match it, and we keep repairs warranty-safe by leaving the manufacturer’s structural components in place rather than cutting into a slab to force a fix. On fiberglass doors, that means manufacturer-compatible fillers and epoxies for surface damage instead of hardware-store caulk. On hardware, it means hinge sets, sweeps, sills, and lock cartridges correct for the system rather than generic substitutes that fit loosely.
That’s also why we bring a wider roster to the table: KraftMaid cabinetry, Cambria and Silestone quartz, Kohler fixtures. A Therma-Tru door decision rarely stands alone in a Summerlin remodel, and we’d rather handle the whole scope than hand you off.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Summerlin
Summerlin’s climate is hard on entry doors in ways that don’t show up in milder parts of the country. Extreme desert heat and intense UV break down sealants, finishes, and gaskets faster here than almost anywhere, and the dust and wind-driven monsoon rain find every gap. Here’s what we see most often on Therma-Tru systems in Summerlin.
- Sun-baked fiberglass skins on Fiber-Classic and Smooth-Star doors. South- and west-facing entries take the worst of the afternoon sun, and over time the fiberglass surface chalks, fades, and develops fine surface cracks. It’s cosmetic at first. Left long enough, the gel coat gives up and moisture gets into the skin, which is when refinishing stops being enough.
- Sill and threshold failures. Worn adjustable sills, hardened sweep gaskets, and deteriorated weatherstripping are the number one cause of a door that “leaks.” They let in dust, wind-driven rain, and pests. Doors with a southeast or southwest exposure in Summerlin catch the worst of both sun and storm-driven water, so their seals age out first.
- Binding multi-point and mortise-lock hardware on Classic-Craft doors. Heavier premium fiberglass slabs sag and settle on their hinges, and a lock that was smooth at install starts to bind or feel gritty. It’s usually hinge wear and a slab that was shimmed poorly at install, not a failed lock.
- Rust breakthrough on steel Benchmark doors. Steel entry doors rust from the inside out at the bottom rail and hinge stiles, where water sits and never fully dries. Dents on high-traffic garage and side entries are common too, and once rust reaches the edge of a panel, patching is short-lived.
- Drafts and whistling at the perimeter. Stucco-and-tile homes settle and shift, and the frame-to-wall seal at the perimeter is where the cold air and dust sneak in. Recaulking the exterior perimeter and re-shimming the frame often solves a draft that a homeowner assumes needs a new door.
Here’s how a typical Therma-Tru entry call in Summerlin usually goes. The homeowner notices daylight at the edges, dust collecting on the interior threshold, and a door that sticks in July but swings loose in January. The usual culprit is a compressed or hardened sweep gasket, a worn adjustable sill, and hinges that have crept out of alignment as the slab settled. A qualified pro adjusts the hinges and sill, replaces the sweep and weatherstripping with OEM-compatible parts, and realigns the lock hardware. Where the fiberglass skin itself is sun-chalked or cracked, the pro assesses whether refinishing and resealing is worthwhile or whether the slab is past saving.
Therma-Tru Parts & Our Repair-vs-Replace Approach
For Therma-Tru hardware and weather seals, OEM replacement parts – sills, sweeps, hinge sets, and lock cartridges – fit correctly and last longer than generic big-box substitutes. We use quality parts that fit Therma-Tru equipment. We don’t stock, carry, or order genuine Therma-Tru parts, and we’re not a dealer. For finish and structural repairs, we use manufacturer-compatible fillers and epoxies before we’ll recommend a full slab replacement.
The repair-or-replace call comes down to what’s failed. Glass, hardware, and seal repairs are almost always worth doing on a solid slab. Sun-cracked or rusted-through skins on a 20-year-old door usually mean a new door is the better spend, because the cost of chasing a failing skin outruns the cost of replacement. We’ll tell you which side of that line your door is on before you commit to anything, and the written estimate sets the final price.
If your entry is on the fence, call (844) 797-3059 and we’ll talk through what you’re seeing. Estimates are free.
Our Therma-Tru Service Process – Step by Step
1. Diagnosis. We start at the door and work outward: hinge alignment, sill height, sweep contact, weatherstripping compression, perimeter seal, and the condition of the slab skin. On a Summerlin door, sun exposure matters, so we note which direction the entry faces before we decide what’s failing.
2. Repair or install. Repairs follow the diagnosis – adjust, replace seals and hardware, realign the lock, refinish the skin where it’s salvageable. New Therma-Tru installs get a level, correctly shimmed frame, a sill set to drain, and a perimeter seal built for stucco.
3. Test. We open and close the door through a full swing, check the lock for bind, look for daylight at the edges, and check the sweep contact against the threshold. A door that tests clean here is one that’ll stay sealed through a dust storm.
4. Warranty and handoff. We explain what we replaced and why, what to watch for next, and we leave the manufacturer’s structural components intact so your Therma-Tru coverage isn’t compromised by our work.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Summerlin
We service and install the full range of Therma-Tru entry systems you’ll find on Summerlin homes: Fiber-Classic fiberglass entry doors, Smooth-Star smooth fiberglass doors, Classic-Craft premium fiberglass entries, and Benchmark steel doors. That covers single and double entries, doors with sidelights and glass lites, and doors paired with transoms. We handle the repair side (seals, hardware, sills, sweeps, refinishing) and the installation side (new slabs, full entry systems, frame and perimeter sealing) with quality parts that fit the equipment. We don’t claim to stock Therma-Tru products or parts – we source what the job needs and tell you what’s involved before we start.
We Also Service These Brands
Therma-Tru is one door brand in a much wider roster. We also work with KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures, and our window and door sourcing runs across impact-resistant systems and premium entry brands. If your Summerlin project touches more than the front door, you can keep it under one contract instead of stitching together three contractors and hoping the schedules line up.
FAQs – Therma-Tru Construction Service in Summerlin
No. We are an independent Therma-Tru service provider and are not authorized, sponsored, or warranty-backed by Therma-Tru. We repair, install, and service Therma-Tru equipment with quality parts that fit it, and we’re clear about that boundary on every job.
Yes. For Therma-Tru hardware and weather seals, we use OEM replacement parts – sills, sweeps, hinge sets, and lock cartridges – that fit correctly and outlast generic substitutes. We don’t stock or carry genuine Therma-Tru parts; we source what the job needs and use manufacturer-compatible fillers and epoxies for finish repairs.
Most seal, hardware, and adjustment work is a single visit. Full door replacement is a longer appointment depending on the entry, sidelights, and whether the frame needs rebuilding. Call (844) 797-3059 and we’ll give you a realistic window for your door – estimates are free.
We cover Fiber-Classic fiberglass doors, Smooth-Star smooth fiberglass doors, Classic-Craft premium fiberglass entries, and Benchmark steel doors, including entries with sidelights, glass lites, and transoms. Repairs and full installations are both in scope.
Not when the work is done correctly. We leave the manufacturer’s structural components in place, use parts that fit the system, and avoid cutting into a slab to force a fix, which is what usually puts coverage at risk. We’ll flag anything on your door that looks like it should go back to the manufacturer first.
It depends on the scope. A seal and hardware repair is a small line item; full entry replacement and the surrounding remodel work are larger. The written estimate sets the final price, and estimates are free. Call (844) 797-3059 for an exact quote.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4500 – $15000 |
| Full Bathroom Remodeling | $9000 – $28000 |
| Full Kitchen Remodeling | $14000 – $45000 |
It can often be refinished if the fading and chalking are surface-level, but once the skin has cracked and moisture has gotten in, replacement is usually the better spend. A technician needs to see the slab to make that call, and we’ll tell you honestly which side of the line you’re on.
It’s almost always a seal issue first: a compressed sweep gasket, a worn adjustable sill, or weatherstripping that’s hardened in the heat. If adjusting the sill and replacing the seal doesn’t stop it, then we look at the frame and slab.
Hinge wear and slab settling are the usual cause. The heavier premium fiberglass slab shifts on its hinges over time, and the lock hardware goes out of alignment with it. Adjusting the hinges and realigning the lock usually solves it before any part needs replacing.
Yes, at the bottom rail and hinge stiles, where water sits and never fully dries. Southern Nevada’s dry air helps, but monsoon-season water and sprinkler overspray still find those spots.
No. Glass and sidelight damage is a component repair, not a door replacement, and it’s almost always worth doing on a solid slab.
Book Your Therma-Tru Service in Summerlin, NV
If your Therma-Tru entry is letting in dust, sticking, or showing its age in the Summerlin sun, we can tell you what’s actually wrong and what it takes to fix it. Call (844) 797-3059 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One contractor, every phase – from the front door to the roofline.
Written by the team at Construction Summerlin.